Chiligreen RC410M -A82C Manuel d'utilisateur télécharger pdf (Page 18)

1818

Technical Reference Booklet

Fan Power Connectors: CPUFAN1/SYSFAN1

The CPUFAN1 (processor fan) and SYSFAN1 (system fan) support system

cooling fans using +12V via a four/three-pin head connector. When connecting

the wire to the connectors, always take note that the red wire is the positive and

should be connected to the +12V, the black wire is Ground and should be

connected to GND. If the motherboard has a System Hardware Monitor chipset

on-board, you must use a specially designed fan with speed sensor to take

advantage of the CPU fan control.

Power LED: D55/D56 (optional)

The green LED lights when the system is in the power-on state.

The red LED lights whenever AC power is attached, irrespective of whether the

system is powered-on, powered-off or in standby mode.

SYSFAN1

CPU FAN

D56- +5VLED (Green)

D55- 5VSBLED (Red)

FOXCONN

REMOVE

FOXCONN

REMOVE

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Pas de commentaire

Chiligreen RC410M -A82C Manuel d'utilisateur Page 18